Panasonic CZ-RTC3 Operating Instructions Manual page 37

*To display each item, see steps 1 to 4 on the previous page.
Temp sensor
• Select the temperature sensor to
control the room temperature.
Main/sub
• When 2 remote controllers are
connected to the same indoor unit,
this registers one remote controller
as [Main] and the other as [Sub].
(There is no difference in function
between Main and Sub, however,
when the remote controller sensor is
selected for the temperature sensor
setting, the [Main] sensor controls
the operation.)
Vent output
• [Set]: When the air conditioner is
turned ON/OFF, the connected
ventilation fan is turned ON/OFF,
too.
• To interlock the air conditioner and
the fan, another installation work is
required.
Contact address
• If you need to contact for servicing,
check the back cover of the
operating instructions for indoor units
or outdoor units.
Indoor unit
Remote
controller
Temp
sensor
(EN)
37