Operating Instructions
IPsec (IPv4) Options Setup
It is possible to perform detailed IPsec (IPv4) connection settings. Usually they do not need to be
modified. You may need specialist knowledge when performing these settings.
Basic
ID
Domain Name
Own LAN Network IPv4
Address
LAN Network
94
Set an ID indicating your identity. You can set an IPv4 Address or
Domain Name. If a Domain Name is set, set the Conversion Mode to
Aggressive.
When your ID is a Domain Name, set it here.
Set All or Specify the source IP address of the packet.
When selecting All, targets the network that is set by this product's
LAN side IP address setting, and encapsulates the packet by IPsec.
When selecting Specify, targets the address that is specified by LAN
Network, and encapsulates by IPsec.
Set the packet source network address of this product's LAN side
network when Own LAN Network IPv4 Address is set as Specify.