Operating Peripheral Equipment - Panasonic PT 52LCX66 Operating Instructions Manual

Operating Peripheral Equipment

You can operate other manufacturers' components using
this unit's Remote Control.
1
Connect the external devices to the Projection
Display and turn Off the external devices.
2
+
3
58
For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo
Press both buttons
simultaneously for more than
3 seconds.
• Release the buttons when the
equipment selection buttons
start flashing.
Select the equipment with the
equipment selection button.
• The selected button remains lit
(other buttons are not lit).
4
5
If the equipment does not operate with
Remote Control
• When your equipment has a single code
→ Input the remote control code again
• When your equipment has multiple codes
→ Change the code with step 4 above and test
again (p. 60-62)
Caution:
• Registration will fail if the wrong code is input or it takes more
than 30 seconds to register.
To find a code not listed in the code
list
This procedure searches all codes and is called the
"sequence method."
1
+
2
Input the equipment's 4-digit
Remote Control code.
(p. 60-62)
Confirm the equipment with
the Remote Control.
• The external equipment turns
On.
After step 3 above, change the
code and test store.
• Operate the equipment with the
Remote Control. (p. 59)
• Repeat until the code is found.
• It may take many attempts
before the correct code is found.
When the correct code is
found.