Preventing Your Telephone Number Being Displayed On The Caller's Telephone (Connected Line Identification Restriction [Colr]) - Panasonic KX-NS1000 Operating Manual

1.9.5 Preventing Your Telephone Number Being Displayed on the Caller's Telephone (Connected Line Identification
Restriction [COLR])
To show either the number assigned to the outside line or your extension
PT/SLT/PS/SIP Extn./S-PS
Off-hook.
•
Availability of this feature depends on the ISDN service of your telephone company.
•
When you forward a call to an outside party, the CLIP number for that call will be that of the
calling party or of the forwarding extension depending on system programming.
•
If you use the ICD Group button to make a call to the other party, the telephone number
assigned to the ICD Group will be used.
1.9.5 Preventing Your Telephone Number Being Displayed on
the Caller's Telephone (Connected Line Identification Restriction
[COLR])
When receiving an outside call, you can select whether the caller can see your telephone number or not.
To show/prevent
PT/SLT/PS/SIP Extn./S-PS
Off-hook.
•
You can change the mode by pressing a preset COLR button while on-hook (There is no
COLR button on KX-UT series SIP phones).
The COLR button light shows the current status as follows:
Off: shows your telephone number.
Red on: prevents your telephone number being displayed.
•
Availability of this feature depends on the ISDN service of your telephone company.
Customising Your Phone
•
3.1.3 Customising the Buttons
Create or edit a Connected Line Identification Restriction (COLR) button.
186 Operating Manual
7 2
Enter 7 2.
7 0
Enter 7 0.
1
Public
OR
Your extension
2
Enter 1 for public or 2
for your extension.
0
Show
OR
C.Tone
1
Prevent
Enter 0 to show
or 1 to prevent.
C.Tone
On-hook.
On-hook.