Controller Node Connections - HP 3PAR StoreServ 7450c Planning Manual

Table 1 1 TCP/IP Port Usage Table (continued)
Port
5783: 3PAR Management Service
with SSL (secured)
5785: 3PAR InForm Remote Copy
5988: WBEM CIM-XML (HTTP)
(unsecured)
5989: WBEMCIM-XML (HTTPS)
(secured)
8008: Unsecured (HTTP) WSAPI port
8080: Secured (HTTPS) WSAPI port

Controller Node Connections

The controller nodes provide the ports that are required to connect to external drives, systems, and
other devices. A controller node contains one PCIe slot that accepts the dual-port or quad-port
Fibre Channel adapter, dual-port or quad-port NIC, or the dual port 10 Gb/s iSCSI adapter. The
number of ports available for the host connection will vary based on the configuration.
NOTE: Ethernet Port (MGMT) is also used for the management interface connection.
Fibre Channel SFP adapters are used to connect to the customer FC switch and/or hosts and can
also be used for Remote Copy operations. Depending on whether your system includes two or four
nodes and the type of PCI adapter installed (FC or CNA), a system can support a maximum of
4–24 SFPs.
26 Network, Cabling, and Connectivity
Usage
HP 3PAR Recovery Manager
HP 3PAR System Reporter
HP 3PAR Service Processor
Used by the following components for
storage system monitoring and
configuration over a secured channel:
HP 3PAR OS Management Console
HP 3PAR OS CLI
HP 3PAR Recovery Manager
HP 3PAR System Reporter
Used by the Remote Copy Software to
receive remote replication storage data
sent by the Remote Copy service from
another HP 3PAR Storage Array.
HP 3PAR Remote Copy Software
Unsecured port used by the Remote
Copy application to transport data (it
does not exist on the management LAN
and is only visible/active on RCIP
network segments)
Used by the following component for
storage system monitoring and
configuration over an unsecured
channel:
HP 3PAR CIM Server
Used by the following component for
storage system monitoring and
configuration over a secured channel:
HP 3PAR CIM Server
Used by WSAPI client to perform HP
3PAR StoreServ 7450 administration
Used by WSAPI client to perform HP
3PAR StoreServ 7450 administration
Flow of Traffic
3PAR CLI Server
HP 3PAR Service Processor --> HP
3PAR CLI Server
HP 3PAR IMC <--> HP 3PAR CLI
Server
HP 3PAR CLI <--> HP 3PAR CLI Server
Recovery Manager <--> HP 3PAR CLI
Server
HP 3PAR System Reporter <--> HP
3PAR CLI Server
HP 3PAR Remote Copy Software on
the HP 3PAR StoreServ 7450
Storage <-- 3PAR Remote Copy on
HP 3PAR StoreServ 7450 Storage
(A dynamic port is allocated for
sending data from the Remote Copy
Software on the HP 3PAR Storage
System.)
3rd Party CIM Client <--> HP 3PAR
CIM Server
3rd Party CIM Client <--> HP 3PAR
CIM Server
3rd Party WSAPI Client <-> HP 3PAR
CLI Client
3rd Party WSAPI Client <-> HP 3PAR
CLI Client