Controller Node and Internal Component LEDs
Controller nodes have the following LEDs:
NOTE:
Issue the locatenode command to flash the hotplug LED blue.
Figure 14 Controller Node LEDs
Table 7 Controller Node LEDs
Callout
1
2
3
Ethernet LEDs
The controller node has two built-in Ethernet ports and each includes two LEDs:
LED
Appearance
Status
Green
Hotplug
Blue
Fault
Amber
Indicates
Node status Good
On – No cluster
Quick Flashing – Boot
Slow Flashing – Cluster
Node FRU Indicator
On – OK to remove
Off – Not OK to remove
Flashing – locatenode command has been
issued
Node status Fault
On – Fault
Off – No fault
Flashing – Node in cluster and there is a fault
Controller Node and Internal Component LEDs
15