Yamaha FWX120 User Manual page 6

Cautions
• Be sure not to install the product in an unstable location or where it will be exposed to
vibrations.
It could fall or turn upside down, thus resulting in injury or damage to the product.
• Be sure not to install the product anywhere where it will be exposed to direct sunlight or
extraordinarily high temperatures (near a heater, etc.).
Failure to observe this could result in damage to the product.
• Be sure not to use the product anywhere where it will be exposed to rapid changes in ambient
temperature.
Any rapid change in the ambient temperature could result in condensation on the product, which could
then result in damage to the product. Ensure to leave the product for a while until it has dried off with
the power turned off if any condensation has occurred.
• Ensure not to stack the product with other equipment.
Failure to observe this could result in heat building up and damage to the product.
• Ensure not to connect any cables while the power is on.
Failure to observe this could result in damage to the product and any connected equipment.
• Ensure to earth any static electricity from your body or clothing before touching the product.
Failure to observe this could result in damage to the product.
• Power off the product and then remove all the cables before moving it.
The product or connected equipment could fall or turn upside down, thus resulting in injury.
6 | FWX120 User's Manual