Usage Notes - Yamaha FWX120 User Manual

Usage notes

• Please note that Yamaha cannot assume any
responsibility for any damage resulting from
improper use or configuration of the product.
• Connecting a USB data communication terminal
to the USB port of the product will enable a
wireless WAN connection via the 3G/LTE mobile
phone network. Even if the data communication
terminal contract is a flat-rate system any use of it
with an improper configuration could be charged
for under the measured-rate system. Please note
that Yamaha cannot assume any responsibility
for any damage resulting from improper use or
configuration of the product.
• Please note that the USB port and microSD slot
of this product will not necessarily support all
types of USB memory sticks and microSD cards.
• Operation of USB memory sticks and microSD
cards can be verified from the "Basic configuration
page" – "Advanced settings" – "Configure
external device" screen – "Test performance of
external memory".
• It is recommended that any data on a USB
memory stick or microSD card be periodically
backed up. Please note that Yamaha cannot
assume any responsibility for any damage
resulting from the loss or destruction of data
during usage of the product.
• Ensure not to install the product anywhere it will
be exposed to any strong magnetic field.
• Do not connect any equipment that generates
any noise on the same power line as the product.
• Use of the product can result in noise being
generated in telephones, radios, and TVs. If any
noise does occur then please change the place
or direction in which the product is installed.
• If you transfer the product you will also need to
transfer this manual and the accompanying CD-
ROM.
• A lithium battery is used in the product as a power
backup for the clock function. Ensure to follow
the instructions of your local government when
disposing of the battery.
• When transferring/disposing of the product please
be sure to read "Instructions on transferring/
disposing of the product" in "Operation Manual"
(included in the attached CD-ROM) to perform
the following operations:
(1) Delete the NetVolante DNS registration.
(2) Initialize all the configurations.
• A 1000BASE-T connection will require an
Enhanced Category 5 (CAT5e) or better LAN
cable.
FWX120 User's Manual | 7