Table of Contents
Advertisement
Replacing Consumables
4
Remove the paper feed roller module
straightly, holding up the paper feed
case along the groove of the feed cover
to pull out the claw out of the case.
5
Install the new paper feed roller mod-
ule with its gear on the right.
1 Hang both ends of the paper feed
roller module.
2 While slightly lifting the paper feed
roller module, pass the claw along
the groove of the feed cover.
3 Attach the bearings at both ends of
the paper feed roller module into the
guide grooves of the chassis in the
scanner.
.
Chassis
Bearings
Green levers
28
Claw
Groove
Paper feed case
Advertisement
Table of Contents
