Panasonic BL-C20 Operating Instructions Manual page 65

Setting
White Balance
AC Power
Source
Frequency
Color Night
View
3.
Click [Save] when finished.
• The new settings are saved.
• When finished, "Success!" is displayed.
4.
Click [Go to Camera page].
• The Camera page is displayed.
Select from the following options.
• Auto (default)
• Fixed Indoor
• Fixed Fluorescent
(White)
• Fixed Fluorescent
(Daylight)
• Fixed Outdoor
Note
The kelvin (symbol: K) is the standard unit for color
temperature.
• This setting may correct flickering caused by power line
frequency.
– 50 Hz (default)
– 60 Hz
• In the color night view mode, the camera image becomes
brighter in a low illuminance. The camera image returns to
normal operation in a bright location.
• If you enable the color night view mode, refresh interval
may increase.
• Subjects that are moving in low illumination may be
blurred, not distinguished, or not displayed.
Note
When the camera transmits a dark scene, the camera
image may become white, or horizontal lines may be
displayed on the screen. This is one of the characteristics
of a CMOS sensor. This is not a malfunction.
Description
— Automatic adjustment
— Electric bulb (2800 K)
— White (3600 K)
— Daylight (4000 K)
— Solar light (6000 K)
Operating Instructions
65