Special Features
SPECIAL FEATURES
SET UP
Antenna/Cable
Mode
Select either Antenna
or Cable
mode, depending
on the type of incoming signal you
are using. Cable must be 8VSB format for DTV reception.
Procedure
£]
In SET UP Menu, select iNPUT.
£3
Press the Ib arrow twice, then the • and • arrows to select ANTENNA, Cable STD, Cable
HRC or Cable IRC.
ANTENNA - VHF/UHF
Cable STD - StandardCable TV Signals
Cable HRC - HarmonicRelatedCarder
Cable IRC - Incremental Related Carrier
Note:
Contact your local cable provider ff you are not sure which setting to use.
_1
Press the ACTION button to make your selection.
O
Press the 41 arrow to exit back to Roller Guide.
Note:
Whenever the antenna or cable mode is changed, Timer I and Timer 2 will revert back
to default settings.
SET UP
SOURCE
ANTENNA
CH MAP
ON
[]