Table of Contents
Advertisement
SPECIAL
FEATURES
Programming
Available
Channels
You must perform the automatic
channel programming
before manually
adding and
deleting channels because of the digital tuning system used by the STB.
This method
will ensure that every available channel will be captured and stored into memory.
Automatic
Channel
Programming
The STB will scan for all available
channels
and store them in memory.
The scan wilt
normally
take several
minutes
to complete.
Procedure
£3
In SET UP Menu, select PROGRAM to choose AUTO to automatically scan and store all
channels with a signal.
O
Press the • arrow to select AUTO.
O
Press the ACTION button to start the auto scan.
[3
Press the ACTION button to cancel the auto scan or exit back to SET UP Menu after the
auto scan is complete.
[3
Press the •
arrow once to exit back to Roller Guide.
Note:
As more
digital
channels
become
available
in your
area,
the AUTO
feature must be selected
to store the new digital channels
into memory.
Manual
Channel
Programming
After programming
all available
channels,
you can
use
the MANUAL
feature
to
selectively
add or delete channels.
Procedure
[3
In SET UP Menu, select PROGRAM to choose MANUAL to manually add or delete
channels.
O
Press the • arrow twice to select MANUAL.
O
Press the ACTION button to edit channels.
Use the A, • arrowbuttonsandnumerickeypadto selecta channel.
Use the •
and • arrowbuttonsto delete or addchannels.
Press the ACTION button to exit back to SET UP Menu,
O
Press the •
arrow once to exit back to Roller Guide,
SET UP
AUTO
MANUAL
The AUTO feature must be selected first to ensure that all
available channels are captured and stored into memo_j.
[]
Advertisement
Table of Contents
