Epson Stylus pro 4000 Setup Manual page 9

8. Hold the both fixed and movable flanges, and
rewind the paper to the line marked with
A4/B4.
9. Move the paper lever to the secured position.
The printer automatically feeds the paper to
the printing position.
10. Extend the paper tray and paper tray cover
according to the paper size.
11. Close the roll paper cover.
12. Press the Paper Source
Auto Cut On on the LCD.
button to select Roll
Loading the Cut Sheet
To install the cut sheet media to the paper tray,
follow these steps.
Note:
The method for loading the cut sheets described in this
section is for paper smaller than A3 size. If you want to
load A3 or larger paper, or if you want to know the
details of paper handling, see the "Paper Handling"
section in the Reference Guide included on the Printer
Software for EPSON STYLUS PRO 4000 CD-ROM
shipped with your printer.
1. Make sure that the printer is on and in the
READY status.
2. Lift up the paper tray cover, and pull the paper
guide roller up.
3. Raise the paper guide, and slide the edge
guide to the left as far as it will go.
9