VQT9650 Video Cassette Recorder NV-FJ630AM Contents Warning and Important Information Controls and Components Connections Tuning the TV to Your VCR Storing TV Broadcasts in Your VCR Language Setting of the On Screen Display Setting the Clock of Your VCR Settings Using the On Screen Display...
Plus, [Alumina] Head Cleaner further enhanced cleaning efficiency. – Based on in-house tests with Panasonic video cassettes. Actual head life may vary according to conditions of use, tape type, temperature, humidity, etc. Cautions before you operate this VCR Avoid: –...
Controls and Components POWER TIMER REC SEARCH JET REW Í/ I Á TAPE PICTURE REFRESH MODE POWER INPUT SELECT DIRECT REC REPEAT Í VOLUME – NAVI INDEX SEARCH PICTURE MODE MENU JET REW DATE – – – CANCEL SPEED PROG. / CHECK TIMER Á...
TV. simultaneously until the [! " hold] indication appears in the VCR display. the [! " hold] indication appears in the VCR display to inform you that no operation is possible. simultaneously until the [! " hold] indication disappears.
Notes: – If you are using a Panasonic TV, this setting has already been made, and so you do not need to perform the above setting procedure. However, this remote control may not work with some Panasonic TVs.
Tuning the TV to Your VCR The VCR supplies a signal to the TV via the RF coaxial cable on channel E21-E69. It is possible to view the video picture on your TV in the same way that you watch TV broadcasts.
Storing TV Broadcasts in Your The VCR is fitted with its own tuner (just like a normal TV) and can be preset to receive up to 99 TV broadcast stations. Plug in Auto Tuning When the VCR is turned on after connecting the aerial cable and the mains lead, Auto Tuning starts.
Page 8
6 Press the Cursor buttons (34) SYSTEM] then select [AUTO] by pressing the Cursor buttons (21) – The VCR automatically distinguishes between PAL and SECAM broadcasts. – If the picture lacks colour when [AUTO] is selected, select [MESECAM] or [PAL].
To Add and Delete the Channel Example: If you want to add a new channel between Channel 4 and Channel 6, 1 Press the MENU button to display the Main menu on the TV screen. 2 Press the Cursor buttons (34) to select [CH ADD&DELETE] then press the OK button 3 Press the Cursor buttons (34)
Language Setting of the On Screen Display Select one of the 2 languages displayed: English and Arabic. Preparations – Confirm that the TV is on and the VCR viewing channel is selected. – Turn on the VCR. Operations 1 Press the MENU button to display the Main menu on the TV screen.
Settings Using the On Screen Display Preparations – Confirm that the TV is on and the VCR viewing channel is selected. – Turn on the VCR. – Set the VCR/TV switch to [VCR]. To Set the Colour TV System 1 Press the MENU button display the Main menu on the TV screen.
Navigator Function. – Press the Cursor buttons (21) [OFF]. OFF: Initially set at this position. ] appears on the VCR display and Jet Navigator function works. If you select [ON], [OSD REC] is set to [OFF] automatically. DELETE NAVIDATA: – Press the Cursor buttons (21)
Playback Preparations – Confirm that the VCR is on. – Confirm that the TV is on and the VCR viewing channel is selected. – Insert a recorded video cassette. For Normal Playback: Press the Play button For Cue or Review Playback:...
EJECT button will eject the cassette and automatically turn itself off again. VCR-off Search When the VCR is off, the VCR starts intro-jet scan of an inserted cassette by pressing the SEARCH button To Eject Video Cassette Using the Remote...
Recording Preparations – Confirm that the VCR is on. – Confirm that the TV is on and the VCR viewing channel is selected. – Set the VCR/TV switch to [VCR]. Operations 1 Insert a video cassette with an intact erasure prevention tab.
Page 16
– Every time you press this button, the recording duration indicated in the VCR display changes in the following order. – For example, if you select [30], the VCR records a programme from that moment on for 30 minutes. Counter display (normal recording mode) (min.)
7 At the point where you want to stop recording, press the Stop button Notes: – If you leave the VCR in the recording pause mode for more than 5 minutes in step 3 or 6, the VCR automatically switches over to the stop mode to protect the video heads.
Preparations – Confirm that the VCR is on. – Confirm that the TV is on and the VCR viewing channel is selected. – Insert a video cassette with an intact erasure prevention tab.
Page 19
NTSC system: Checking a Timer Programme – The VCR must be turned on, or in timer recording standby mode. – Confirm that the TV is on and the VCR viewing channel is selected. 1 Press the PROG./CHECK button twice. – Every time you press the PROG./ CHECK button shifts below.
– The tape length of the inserted cassette must be set correctly. (See page 12.) – The VCR must not be in the timer recording standby mode. – A programme of at least 15 minutes must be recorded on the tape.
– When a timer recording starts. – When you press the REC button during recording. Conditions for correct operation of the Index search function: – The VCR must be in the stop mode or in the playback Erased mode. Programme 3 –...
– When you press the REC button during recording. Conditions for correct operation of the Intro-Jet Scan function: – VCR must be switched on, be in the playback mode or be in the standby mode. – Each programme recorded on the tape must be at least 15 minutes long.
[The remote control does not operate correctly.] – The remote control transmitter beam is not reaching the VCR. Ensure that the remote control is being pointed at the VCR and that the transmitter beam is not obstructed. – The distance is too far.