Sony PCM-7040 Operation Manual page 68

The display that
appears and the Data
meaning of the
display
cHASE-Au (CHASE
AUDIO)
PLAY*
Loc
cHASE-S (CHASE KEY
MODE)
on*
on-oFF
orG codE (ORIGIN
CODE)
dAt1
dAt2
dAt0
dAtE rEc (DATE REC)
on*
oFF
diSP [1] (DISPLAY KEY
MENU [1])
diSP [2] (DISPLAY KEY
MENU [2])
[SEt Grd] (SETUP
MENU GRADE)
bASic*
EnHAncEd : expanded display mode
[SEt tc] (SETUP TC
MENU)
cLoSE*
oPEn
FrEErun (TC
GENERATOR MODE)
oFF*
on
GEn out (TC OUTPUT)
oFF*
on
Functions
Selects the timing to output
the playback sound during
chase synchronized position.
: playing mode (you can hear
the variable-speed
playback sound)
: Chasing lock (you cannot
hear the variable-speed
playback sound)
Selects to release chase
operation mode.
: the other tape transport
control keys
: the CHASE key or the
EJECT key
Selects the original code of
the AES/EBU output
: DAT1
: DAT2
: :
: DAT0
Selects to record the
date/time.
: record in assemble mode
: not record
- Selects to display the display
key menu.
- Selects to display the display
key menu.
Selects the level of the setup
menu display from basic
display and expanded
display.
: basic display mode
Selects to open or close the
time code menu in the setup
menu.
: close
: open
Selects the operation mode
of the time code generator
: RECRUN/REGEN
: FREERUN
Selects the time code output.
: outputs the playback time
code
: outputs the generated time
code
The display that
appears and the Data
meaning of the
display
tc rEGEn (INPUT TC
REGENERATE)
on*
oFF
rEc ub (REC U-BIT)
tc
SEL*
int
tc dLY (TC DELAY)
dout*
Aout
ELAPSE (ELASPE
MODE)
ELAPSE*
PrG
[SET id] (SETUP ID
MENU)
cLoSE*
oPEn
id rEc (REC ID)
StArt id*
SHort id
End id
S-id Auto (ID AUTO
REC)
oFF*
ASS
rEc
SiGnAL
L SYnc tH (LEVEL
SYNC THRESHOLD)
-40 0
-50 0*
-80 0
Chapter 7 Menu Operations
Functions
Selects to regenerate the
external time code.
: regenerating the external
time code
: no regenerating the external
time code with jitters
Selects the user bit.
: records the user bit
according to the setting of
"rEc tc".
: records the user bit of the
internal time code generator
or the time code on the
recorded tape.
Selects the phase
adjustment of the time code
output.
: the digital audio signals
: the analog audio signals
Selects when the unit resets
the elapsed time.
: when you press the RESET
key
: when you press the RESET
key or when the unit detects
a start ID.
Selects to open the setup
menu of the ID.
: close
: open
Selects the ID to be recorded
or erased.
: START ID
: SKIP ID
: END ID
Selects the mode to
automatically write the Start
ID.
: does not automatically write
: writes at the recording start
point during assemble
recording
: writes when the input level
beyond the setting level of
"L Sync tH".
Selects the input level for
automatically writing the Start
ID.
: -40 dB
: -50 dB
: :
: -80 dB
(Continued)
7-9