Environmental And Power Requirements - Fujitsu MCE3064SS Product Manual

2.1.3

Environmental and power requirements

Table 2.3 lists the environmental and power requirements.
Table 2.3
Item
Power Average
requirements
Ready
Power
consumption
Random seek, read, or write
(*2)
Power save
With panel
Dimensions
(W×D×H)
Without panel
Weight
Environmental Operating
requirements
Idle
Transport
Installation Tilt angle
Vibration/ Operating
shock
Idle
No cartridge, power ON
Transport
Altitude Operating
Idle
Environmental and power requirements (1 of 2)
+5 VDC±5%, 1.1 A (2.5 A Max., excluded for
terminating resistor) (*1)
3.9 W (*2)
4.9 W (TYP) (*2)
0.5 W (MIN) (*2)
101.6×150.0×25.4 mm
101.6×148.4×25.4 mm
470 g (with panel)
Temperature:
Relative humidity: 10 to 85% (Noncondensing)
Max. wet bulb temperature: 29 °C or lower
Temperature:
Relative humidity: 10 to 85 % (Noncondensing)
Max. wet bulb temperature: 36 °C or lower
Temperature:
Temperature:
Relative humidity: 5 to 90% (Noncondensing)
Max. wet bulb temperature: 41 °C or lower
Requirement: Packing conditions specified by Fujitsu
–5° to +10°
0.4 G (5 to 500 Hz, sine sweep)
Shock 2 G (10ms, half-sine pulse)
1.0 G (5 to 500 Hz, sine sweep)
Shock 5 G (10 ms, half-sine pulse)
Shock 50 G (10 ms, half-sine pulse)
Requirement: Packing conditions specified by Fujitsu
3,000 m (10,000 ft) or less
12,000 m (40,000 ft) or less
C156-E097-01EN
Specification
5 to 45 °C (*3)
(gradient 15 °C /h or less)
0 to 50 °C
–40 to 60°C (24 hours or less)
–20 to 60°C (24 hours or more)
2 - 5