Moving The Robot - Yamaha YK250XGC Installation Manual

2.2
SERIOUS InjURy May OCCUR If ThE RObOT fallS anD PInS SOMEOnE UnDER IT.
• Do not allow any Part of your boDy to enter the area beneath the robot During worK.
• always wear a helmet, safety shoes anD gloves During worK.
2
To check the mass of each robot, refer to "1.1 Basic specifications" in Chapter 5.
Fold the arms while referring to the Fig. below.
1
Place the robot on the base.
2
One work person holds the support of the robot main body with both hands and other work person holds
the robot cable to place the robot on the base.
Temporarily secure the robot by tightening the bolts.
3
2-4

Moving the robot

Moving the robot

Robot cable
Support
Support
Robot main body
23205-HM-00