Programme Sorting - Toshiba 42WP36P Service Manual

This TV set is capable of receiving a number of different channels depending upon where you live. Programme sorting is an
easy way of storing each channel on the programme position of your choice.
Manual Tuning (continued)
D. Programme position skip selection
Press the or
position skip option On "
The programme position will then be skipped when
you select channels with the P8 or P9 button.
Note: " " mark will appear beside a skipped pro-
gramme position number when you use the number
buttons on the remote control.
E. Channel selection
F. Channel search operation
Press the button to search up the band or the
button to search down the band.
Press the or
sired channel is displayed.
When a station/satellite is found, it will be displayed.
G. Manual fine tuning (Not normally required)
Press the "+" or
sible picture and sound are obtained.
H. Station label
Station labels appear under the programme posi-
tion display each time you turn on the TV, select a
channel, or press the CALL button.
To change or create station labels:
1) Press the or
character for the first space, then press
the button.
2) Repeat step 1 to enter the rest of the charac-
ters.
If you would like a blank space in the label name,
you must choose an empty space from the list
of characters.
Press the OK button to store your settings.
Tuning to your VCR
(connected via an aerial cable)
If you cannot connect your TV to the VCR using Scart leads,
you will need to allocate a programme position on the TV
for the VCR.
To tune your TV to your VCR play a prerecorded tape:
1
Follow steps 1 to 5 in Manual tuning onthe previous
page to select Search.
2
Press the or button to start the search opera-
tion.
When the VCR is found, your pre-recorded tape will
be displayed.
3
Select the programme position.
It is suggested to use the position No. "0".
4
Press the OK button.
button to turn the programme
" or Off " ".
button repeatedly until your de-
"–" button until the best pos-
button repeatedly to select a

Programme Sorting

Example: To swap channel 22 (Prog.1) for channel 32
(Prog.4):
1
Press the MENU button, then press the
ton repeatedly to display the SET UP menu.
2
Press the or
ing.
3
Press the OK button to display the Programme sort-
ing menu.
4
Press the or
to be moved.
5
Press the button to enter your choice.
6
Press button repeatedly to highlight the new posi-
tion "4", then press the
7
Repeat steps 4 to 6 to move the channel 32 to the
programme position "1".
8
Confirm new sorting list.
– 23 –
or
button to highlight Programme sort-
button to highlight the channel 22
button.
but-