Connecting The Router To Your Computer - D-Link DVG-1402S Quick Installation Manual

Connecting the Router to your Computer

Phone Connections
Connect to your phones
using standard phone
cabling
A. First, connect the power adapter to the power input at the back
panel of the DVG-1402S and then plug the other end of the
power adapter to a wall outlet or power strip. On the front of the
device, the Power LED will turn ON to indicate proper operation.
B. Insert one end of the Ethernet cable into an Ethernet (LAN) port
on the back panel of the DVG-1402S and the other end of the
cable to an Ethernet Adapter or available Ethernet port on your
computer.
C. Insert the telephone cable included with the Router into the
ADSL port, then connect the cable to your telephone line.
D. Check the LED display on the front of the Router to confirm that
the connections have been made.
LAN Ports
Connect to the
LAN and other
computers
WAN Port
Connect to the
WAN (Internet)
2
Reset
Push to return to
factory settings
Power
Input
Connect to
AC Adapter