Mitsubishi Electric apricot ft series Owner's Handbook Manual page 61

D r i v e U p g r a d e s
Windows 95
Use the MS-DOS Fdisk program to create partitions on the disk.
The Fdisk program can be run in an MS-DOS window within
Windows. Type Help Fdisk at the MS-DOS command prompt to
find out more. After using Fdisk, you are prompted to restart the
computer. Once back in Windows, you can format the partitions by
opening the My Computer folder, selecting the new Drive icon and
choosing the Format command from the File menu.
CAUTION
When you run Fdisk, it assumes that you want to work with the first, or
master, drive (it says the is ). To
Current fixed disk drive 1
switch attention to the slave drive, choose
Select next fixed
(option 5) from the main menu.
disk drive
Windows NT
Use the Disk Administrator tool in the Administrative Tools
(Common) folder. This both creates partitions and formats them.
Windows for Workgroups
Use the MS-DOS Fdisk program to partition the disk followed by
the MS-DOS Format command to format the partitions. Use the
MS-DOS Help command to find out more about Fdisk and
Format. See your MS-DOS documentation for instructions on
using MS-DOS Help.
A limitation of Windows for Workgroups is that each partition can
be no more than 2 gigabytes in size.
OWNER'S HANDBOOK 6/5