Power-On Self-Test - Mitsubishi Electric apricot ft series Owner's Handbook Manual

B I O S S e t u p & P O S T
Reserving ISA legacy resources
Multi-boot facility

Power-on self-test

Recoverable POST errors
7/4 OWNER'S HANDBOOK
To reserve interrupts and upper memory block (UMB) regions for
ISA expansion cards, go to the Advanced menu, select PCI
Configuration, then select PCI/PNP ISA IRQ Resource Exclusion
or PCI/PNP ISA UMB Region Exclusion as required.
If you restart your computer and press the
Mitsubishi Electric logo is on the screen, a diagnostics screen
appears, followed by a menu similar to the following:
1. Diskette Drive
2. Removable Devices
3. Hard Disk Drive
4. ATAPI CD-ROM Drive
5. Network Boot
This menu can be used to temporarily use another drive or device to
boot your system, for example a bootable CD-ROM, without
having to enter BIOS Setup. Simply use the
to make a selection. The change is not permanent; the boot device
reverts to the normal setting the next time you turn on your
computer.
Whenever a recoverable (non-terminal) error occurs during POST,
the BIOS displays an error message describing the problem (the
most usual are described below). After some messages, you may be
prompted to Press <F1> to resume, <F2> to enter Setup or just
Press <F2> to enter Setup.
Boot Menu
< Enter Setup >
key while the
ESC
and arrows
UP DOWN