NEC DT730 User Manual page 83

file name by using the digit keys.
TIP:
For details on character entry method, see
TO INPUT CHARACTERS
Operation.
TIP:
A maximum of 20 characters ("0-9", "A-Z", "a-z",
"*", "#", ".", "-" or "_") can be entered as a file
name.
TIP: To delete an entered character, press BK soft
key.
STEP 21:After entering a file name, press
or Exec soft key to start the downloading.
While downloading a file, the LCD displays
"Downloading..." first and then "Saving...".
TIP: Be sure not to turn OFF the DT700 Series while
"Saving..." is displayed on the LCD.
STEP 22:After the downloading is complete, the dis-
play changes as follows:
[Directory]
Download Complete!
Press Exit to Reset
Reset the DT700 Series by pressing Exit
soft key.
HOW
in chapter 4 Basic
(Enter)
Exit
73
Note:
TIP: When the downloading ends in failure, "Down-
loading Failed!" is displayed on the LCD. Check
to see the following and then make a retry.
Check Points
Download file is not placed
in the specified directory.
A different file name is
specified between DT700
Series and FTP/TFTP
server.
Incorrect IP address of
FTP/TFTP server has been
entered from the
telephone.
The power to FTP/TFTP
server or network
equipments is OFF.
LAN cable is disconnected.
Actions
Place the downlaod file in
the specified directory.
Set the same file name
from both DT700 Series
and FTP/TFTP server.
Set the proper IP address
of FTP/TFTP server.
Turn on the power.
Reconnect the cable
securely.