Dial Intercom - NEC DT730 User Manual

DIAL INTERCOM

To initiate
Lift handset or press the
Press DICM key.
Dial desired intercom station number. Receive
ringback tone.
ICM
4:26 PM TUE 13 APR 2004
To answer
DICM LED flashes, indicating an incoming intercom
call.
Press DICM.
Lift handset or press
green.
If called station is engaged in a non-intercom call,
the station may press DICM after placing the origi-
nal call on hold (with
ICM
4:26 PM TUE 13 APR 2004
Speaker key.
Called party
2
Speaker key. LCD shows solid
key.)
HOLD
Calling party
2
To bridge into a dial intercom call
Note:
Bridging is an optional feature.
Press the DICM key, lift handset or press
key.
OVERRIDE
4:26 PM
A three-party conference is established.
CONF
4:26 PM
Note:
Dial intercom provides a Dial Intercom group
where each member of the group may be called by
a 1- or 2-digit number without using their prime
lines.
103
Speaker
Overriding party
3
TUE 13 APR 2004
TUE 13 APR 2004