About Installation Procedure - Toshiba e-STUDIO5540C Software Installation Manual

3.INSTALLING PRINTER DRIVERS FOR WINDOWS
 About installation procedure
Find the installation procedure suited to your environment from the following:
Raw TCP/LPR printing
This equipment supports the Raw TCP and LPR printing via TCP/IP. When this equipment is connected to
your computer in a TCP/IP network, Raw TCP/LPR printing may be most suitable.
 P.41 "Installing the Printer Drivers"
 To print with a Raw TCP connection, this equipment must be configured to enable Raw TCP Print
Service. Ask your administrator if the Raw TCP Print Service is enabled.
 To print with an LPR connection, this equipment must be configured to enable the LPD Print Service.
Ask your administrator if the LPD Print Service is enabled.
SMB printing
This equipment can be used with an SMB printer connection that allows you to connect to this equipment
using File and Printer Sharing for Microsoft Networks service. SMB printing is the common method used to set
up the printer. However, SMB printing is not suitable for printing a large amount of documents.
 P.41 "Installing the Printer Drivers"
It assumes using SMB printing in a small network. If you can use Windows Vista, Windows 7, Windows 8,
Windows Server 2003, Windows Server 2008, or Windows Server 2012 as a print server, it is
recommended to set up for printing via Windows print server.
Internet printing
If you print to this equipment over the Internet, you can use IPP printing under Windows Vista, Windows 7,
Windows Server 2003, and Windows Server 2008. This allows you to print to this equipment from anywhere
on the Internet.
 P.99 "IPP printing"
To print with an IPP connection, this equipment must be configured to enable the IPP Print Service and
must be connected to the Internet. Ask your administrator if the IPP Print Service is enabled.
Novell printing
When this equipment is configured to manage printing with NetWare 6.5 over TCP/IP or IPX/SPX, you can
print through the NetWare print server from Windows Server 2003. In this case, install the printer driver and
set up the SMB printer connection to a print queue created in the NetWare print server.
 P.41 "Installing the Printer Drivers"
To print with a Novell connection, the NetWare server must be configured for printing and this equipment
must be configured to enable NetWare Print Service. Ask your administrator if the NetWare Print Service is
enabled.
Novell iPrint
When this equipment is configured to manage Novell iPrint with NetWare 6.5 over TCP/IP, you can print
through the NetWare print server from Windows Server 2003. In this case, install the printer driver using iPrint
Client from the NetWare server.
 P.111 "Novell iPrint"
To print with a Novell iPrint, the NetWare server must be configured for iPrint and this equipment must be
configured to enable NetWare Print Service. Ask your administrator if the NetWare Print Service is
enabled.
3 INSTALLING PRINTER DRIVERS FOR WINDOWS
Before Installation 39