Toshiba e-STUDIO6540C Management Manual page 81

2.SETTING ITEMS (ADMIN)
Item name
ADDRESS MODE
IP ADDRESS
SUBNET MASK
GATEWAY
 DYNAMIC (When TCP/IP is set by Auto-IP addressing or DHCP server)
Select [DYNAMIC] when you do not know the TCP/IP settings that should be assigned to the
equipment. If [DYNAMIC] is selected when your network supports the DHCP, the IP address, subnet
mask, default gateway, primary WINS server address, secondary WINS server address, POP3 server
address, and SMTP server address are acquired from the DHCP server. If the DHCP is not supported,
an appropriate IP address is assigned to this equipment by the auto-IP addressing function. However,
the auto-IP addressing may not work properly if a router is placed in the network.
 NO AUTO IP (When TCP/IP is set using only the DHCP server)
Select [NO AUTO IP] when the equipment is connected to a local area network with a DHCP server
and you want to set the TCP/IP not using the auto-IP addressing function, but only the DHCP. When
[NO AUTO IP] is selected, the IP address, subnet mask, default gateway, primary WINS server
address, secondary WINS server address, POP3 server address, and SMTP server address are
acquired from the DHCP server, and the IP address assignment by the auto-IP addressing function
disabled.
 STATIC (When connecting to a local area network using static IP addresses)
Select [STATIC] and specify an IP address when connecting to a local area network where static IP
addresses are used. Also set the subnet mask and default gateway as required.
Press [IP ADDRESS] and enter the IP address of this equipment using the digital keys.
Enter the subnet mask and default gateway as required.
Use the arrow buttons to switch the active box.
This item is enabled only when [STATIC] is selected for [ADDRESS MODE].
2 SETTING ITEMS (ADMIN)
Description
NETWORK 79