Connection; Network (And Poe Power) - Bosch DINION IP starlight 7000 HD Installation Manual

14 en | Connection
6

Connection

Notice!
Use proper surge suppression on network/video/power/audio/
data/alarm cables that are routed outdoors, or close to large
inductive loads or electrical mains supply cables.
6.1

Network (and PoE power)

Connect the camera to a 10/100 Base-T network:
–
–
The LEDs beside the Ethernet connection indicate network
connection (green lit) and IP traffic (orange flashing).
Notice!
Use only PoE approved devices.
Power-over-Ethernet can be connected at the same time as a
12 VDC power supply. If auxiliary power (12 VDC) and PoE is
applied simultaneously, the camera selects PoE and shuts off
the auxiliary input.
2016.06 | v1.0 | AM18-Q0704
4 5 6 | 4 5 6
D A E
A L T
T A H
A R -
M P
o
1 2 3 | 1 2 3
E
- +
!
12VDC
MENU
only
12VDC
24VAC
CVBS
STP Cat 5e
RJ45
Ethernet (PoE)
Use STP Category 5e cable with RJ45 connectors (the
camera network socket is Auto MDIX compliant).
Power can be supplied to the camera via the Ethernet cable
compliant with the Power-over-Ethernet standard.
DINION IP starlight 7000
Bosch Security Systems
HD