Philips 1VMN30256A User Manual page 21

Note
• After you made a wired connection, set up necessary network settings.
(For the network setting of wired connection, refer to "Wired Connection" on page 57.)
• Do not insert any cable other than a LAN cable to the LAN terminal to avoid damaging the unit.
• If your modem does not have router functions, connect a wired router.
• If your modem has router functions but there is no vacant port, use a hub.
• For a wired router, use a router which supports 10BASE-T / 100BASE-TX.
• Do not connect your PC directly to the LAN terminal of this unit.
• Please purchase shielded LAN cables at your local store and use them when you connect to network equipment.
Wireless Connection
Make the following connection if you are using a wireless router.
ADSL / cable modem
Internet
No supplied cables are used in this connection:
Please purchase the necessary cables at your local store.
Note
• After you made the wireless connection, set up necessary network settings.
(For the network setting of wireless connection, refer to "Wireless Connection" on page 60.)
• For a wireless router, use a router which supports IEEE 802.11 b/g/n.
(n is recommended for stable operation of the wireless network.)
• Set the wireless router to Infrastructure mode. This unit does not support Ad-hoc mode.
• Other radio devices or obstacles may cause interference to the wireless network connection.
CONNECTIONS
LAN WAN
LAN cable
Y P R / C R
L
P B / C B
R
COAXIAL AUDIO VIDEO COMPONENT
Wireless LAN
HDMI OUT LAN DIGITAL OUT
OUT OUT VIDEO OUT
PCM/BITSTREAM
Wireless LAN
Wireless router
EN
this unit
EN 21