Philips 1VMN30256A User Manual page 47

Category
Video De-interlacing Mode
Output
Black Level
HD Noise Reduction
Audio Night Mode
Down Sampling
Virtual Surround
Blu-ray Disc Audio
LIST OF SETTINGS
Menus / Options
Auto
Video
On
Off
On
Off
Auto
On
Off
On
Off
On
Off
Mix Audio Output
Primary Audio Only
Description
"Auto":
Automatically detects film or video
content, and appropriately converts it.
"Video":
Select this option when the picture is
distorted when using "Auto".
Adjusts brightness to compensate for
ambient room light.
Reduces noise of the playback picture.
"On":
Activates Noise Reduction.
"Off":
Deactivates Noise Reduction.
Compresses range between soft and
loud sounds.
"Auto":
Night Mode will be activated
automatically when Dolby TrueHD
audio is played back.
"On":
Activates the Night Mode.
"Off":
Deactivates the Night Mode.
Sets the sampling rate for outputting
PCM audio from the digital output
(coaxial).
"On":
Over 96 kHz PCM audio will be down
sampled at 48 kHz.
"Off":
For BD or DVD recorded in LPCM
without copyright protection,
2-channel audio signals up to 96 kHz
are output as LPCM signals.
Select "On" to enjoy stereophonic
virtual space through your existing 2
channel stereo system during
playback of BD-video or DVD-video.
"Mix Audio Output":
The audio for the secondary video and
the interactive application will be
output together with the audio for the
primary video.
"Primary Audio Only":
Only audio for the primary video will
be output.
When playing back a BD-video which
only contains primary audio, the
audio output will be the same case as
"Primary Audio Only" even if the "Blu-
ray Disc Audio" is set to "Mix Audio
Output".
EN
EN
47