Accessories - Fujitsu UTP-VX60A Installation Manual

2.3. Accessories

For installation purposes, be sure to use the parts supplied by the manufacturer or
other prescribed parts. The use of non-prescribed parts can cause serious accidents
such as the unit falling, water leakage, electric shock, or fi re.
The following installation parts are furnished. Use them as required.
Keep the Installation Manual in a safe place and do not discard any other accessories
until the installation work has been completed.
(1) Control unit Accessories
Name and Shape
Installation Manual
Key
Sealing washer
Nuts (M8)
Cable ties (with stopper)
Cable gland (M10)
Cable gland (M16)
Cable gland (M20)
Blind bar
Cable tie
Screw (M4×L6 mm)
Cable tie mount
Thermistor
(Inlet air and Outlet air)
Thermistor (Label: GAS)
Thermistor (Label: LIQ)
Thermistor holder pipe
(Small)
Thermistor holder pipe
(Large)
WARNING
Q'ty Application
(This book)
1
For the door of control unit
2
For mounting the control unit to the
wall Waterproof specifications
3
For mounting the control unit to the
wall
3
For securing the cables
19
For cable holes
4
For cable holes
5
For cable holes
1
For mounting when not passing the
cable through the cable gland
5
For securing the optional remote
controller cable
3
For mounting the optional remote
controller
3
For securing the optional remote
controller cable
2
For measuring the room
temperature
2
For measuring the gas pipe
temperature
1
(For gas pipes)
For measuring the liquid pipe
temperature
1 (For liquid pipes)
For mounting the thermistor
1
For mounting the thermistor
1
Name and Shape
Thermistor spring (For small thermistor
holder pipe)
Thermistor spring (For large thermistor
holder pipe)
Template
Connection cable 1
[Label : 32,33,35,37,39,41]
Connection cable 2
[Label : 32,34]
Connection cable 3
[Label : 34,36]
Connection cable 4
[Label : 36,38]
Connection cable 5
[Label : 38,40]
(2) EEV unit Accessories
Name and Shape
Installation Manual
Secure fitting
Tapping Screw L (M4×L16)
Tapping Screw S (M4×L10)
Rubber sheet
Pipe heat insulations
cable tie (Large)
cable tie (Medium)
Seal
Q'ty Application
For mounting the thermistor
1
For mounting the thermistor
1
For installing the control unit
1
For external output
1
For external output
1
For external output
1
For external output
1
For external output
1
Q'ty Application
1 ―
For mounting the EEV unit to the
wall, or stacking multiple EEV units
4
For mounting the EEV unit to the
wall
8
For stacking multiple EEV unit
8
For mounting pipe joints
2
For mounting pipe joints
2
For securing heat insulations
4
For securing cables
1
For pasting unused piping holes
2
En-2