Mitsubishi Electric AE-200A Instruction Book page 54

(2) Touch the [Unit Info.] and [Unit Info. 2] tabs.
Referring to section 5-2-5, make necessary basic settings, and
then touch [Save Settings].
Note: Make sure to set the [System Exp] setting for the AE-200 to
[Expand].
Note: The [AE-200 Apportion] setting will appear only when the
"Charge" license has been registered.
Note: When "AE-200 M-NET" is set to [Use], "Controller" can be
switched to [AE200], [Exp1], [Exp2], or [Exp3] ([AE], [1], [2], or
[3]).
When "AE-200 M-NET" is set to [Do not use], "Controller" can
be switched to [AE200], [Exp1], [Exp2], [Exp3], or [Exp4] ([AE],
[1], [2], [3], or [4]).
(3) Touch the right triangle button to display the [Network] tab, and
touch it.
Referring to section 5-2-6, make sure that [AE200] is selected
as [Controller], set the AE-200's IP address and subnet mask,
and then touch [Save Settings].
The AE-200 will reboot.
When the reboot process is complete, log in to the Initial
Settings menu.
Note: Refer to section 5-2-1 "Logging in to the Initial Settings menu"
for how to log in.
Note: Do not touch the LCD during the reboot.
(4) In the [Controller] section, select [1], [2], [3], or [4] to make
settings for each AE-50/EW-50.
Referring to section 5-2-6, set the IP address of each
AE-50/EW-50 that is connected to the AE-200, and M-NET
address, and then touch [Save Settings].
WT07982X03
Unit Info.
Unit Info. 2
54