NEC Versa LX Manual page 2

Removing a Device from the NEC VersaBay III
Follow these steps to remove a device from the NEC VersaBay III.
1. Save your files.
Either shut down Windows and power off the NEC Versa, or use warm or hot swapping,
2.
which is available with the NEC VersaBay III Swapping utility. The Swapping utility is
provided on the Application and Driver CD that ships with the system.
Close the LCD panel and locate the NEC VersaBay III on your system.
3.
For the NEC Versa LX and LXi, the NEC VersaBay III is located on the front of the
system.
For the NEC Versa SX, the NEC VersaBay III is located on the right side of the system.
Turn the NEC Versa upside down and locate the release lock (see the figure on the
4.
following page). Slide the release lock to the unlocked position.
2 NEC VersaBay III CD-RW Drive Pak
NEC Versa LX and LXi
A - NEC VersaBay III
NEC Versa SX
A - NEC VersaBay III