NEC Versa LX Manual page 4

8. Slide the release lock to the locked position.
9. Turn the system over, open the LCD panel, and power on the system.
Installing the NEC CD-RW CD Software
The NEC CD-RW CD contains a driver and two applications that need to be installed after
installing the CD-RW drive into the NEC VersaBay III. The following sections provide the
installation instructions for the driver and applications. The driver installation only applies to
systems with Windows 95 and Windows 98.
Installing the DOS Mode CD-ROM Driver (Windows 95/98)
Use the following procedure to install the DOS mode CD-ROM driver.
Insert the NEC CD-RW CD into the CD-RW drive. The Choose an Option dialog box
1.
appears. If the CD does not load automatically, do the following.
Double click on My Computer on the Windows desktop.
!
Double click on the CD drive.
!
Select 'Install DOS mode CDROM driver for the CD-R/RW' in the Choose an Option
2.
dialog box.
3. Click OK.
4. Driver installation completes. Click OK.
Installing Easy CD Creator
Easy CD Creator is an application that allows you to create data and audio CDs. Follow these
steps to install Easy CD Creator.
1. In Windows 95 and Windows 98, double click on My Computer.
In Windows 2000 and Windows NT, insert the NEC CD-RW CD into the CD-RW drive.
The Adaptec Master Setup screen appears. If the CD does not load automatically, do the
following.
Double click on My Computer on the Windows desktop.
!
Double click on the CD drive. The Adaptec Master Setup screen appears. Go to step 3.
!
In Windows 95 and Windows 98, the Choose an Option dialog box appears. Select 'Run
2.
Adaptec CD-R/RW software installation program' and click OK. The Adaptec Master Setup
screen appears.
3. Click Easy CD Creator.
4. The Adaptec Easy CD Creator Setup appears. Click Next.
The Software License Agreement appears. Click Yes.
5.
The Choose Destination Location dialog box appears. Click Next.
6.
7. Easy CD Creator is installed. When the installation completes, click Finish.
4 NEC VersaBay III CD-RW Drive Pak