Table of Contents
Advertisement
AVL (Auto volume leveler)
If you select
AVL On
volume level even if you change programmes.
1. Repeatedly press the MENU button to select MENU 4.
2. Press the
button to select
/
D
E
3. Press the
button to select
/
F
G
4. Press the OK button to return to normal TV viewing.
VCR colour system setting
You can adjust the VCR colour system. Under normal circumstances,
select
AUTO
. If necessary (if input signal is weak), change the
colour system by using the instructions below.
1. Press the SYSTEM button. The
2. Repeatedly press the SYSTEM button to select the correct system.
Option:
On some models,
Only a set with
MESECAM
Note :
a.
is for playback only. You cannot record NTSC signals.
NTSC PB
b. If the picture was no colour during playing back a MESECAM
video cassette tape in
.
AUTO
Sleep timer
You don't have to switch the set off before you go to sleep. The
sleep timer automatically switches the set to standby after the
preset time elapses.
To select the number of minutes, repeatedly press the SLEEP
button. r
---
will appear on the screen, followed by
90
,
120
,
180
and
240
.
The timer begins to count down from the number of minutes selected.
Note :
a. To view the remaining sleep time, press the SLEEP button once.
b. To cancel the sleep time, repeatedly press the SLEEP button
until the display
---
r
c. When you switch the set off, the set releases the preset sleep time.
Other functions
, the set automatically keeps on an equal
AVL
.
On
.
VCR System
VCROSystemOAUTO∫
OOOOOOOOOOOPAL
OOOOOOOOOOONTSCOPB
OOOOOOOOOOOSE CAM
OOOOOOOOOOOMESE CAM
/
MESECAM
SECAM
/
can perform this function.
SECAM
, select
AUTO
MESECAM
appears.
mode will appear.
is an optional function.
instead of
10
,
20
,
30
,
60
SLEEP
SYSTEM
MENU
PR
OK
PR
,
17
Advertisement
Table of Contents
