Loading The Memory - Epson EH-LS10000 User Manual

Useful Functions
d
Use the
select the memory name to be saved,
and then press the
confirm the selection.
The current projector settings are saved as
a memory.
If the mark on the left of the memory name
is turned green, it means the memory has
already been registered. When you select a
registered memory, a message is displayed
asking you to confirm that you want to
overwrite the memory. If you select Yes, the
previous settings are deleted and the
current settings are registered.
c
You can save up to 10 memories.

Loading the Memory

a
Press the
The Load Memory screen is displayed.
b
Select the memory name you want to load.
c
•
The color mode saved to the memory is displayed on the right.
•
Depending on the input signal, part of the loaded memory item may not be applied to the
projected image.
•
Memories saved for 2D images can only be loaded when projecting 2D images. Memories saved
for 3D images can only be loaded when projecting 3D images. Unavailable memory names are
grayed out and cannot be selected.
buttons to
button to
button, and then select Load Memory.
65