Settings Menu - Epson EH-LS10000 User Manual

Configuration Menu

Settings menu

Function
Keystone -60 - 60
HDMI Link Device Connections -
HDMI Link
Power On Link
Power Off Link
1*
WirelessHD Device Connections -
WirelessHD
Reception
WiHD Mode
Reset
Menu/Settings
On, Off
Off, Bidirectional,
Device -> PJ, PJ ->
Device
On, Off
On, Off
Full, Dynamic
Yes, No
91
Explanation
Performs vertical keystone correction.
Displays a list of devices connected from the
HDMI1 or HDMI2 ports, or from WirelessHD
Enables or disables the HDMI Link function.
Sets the link function when the power is turned
on.
Set to power on the projector when content is
played on a connected device (Bidirectional or
Device -> PJ) or to power on a connected device
when the projector is turned on (Bidirectional or
PJ -> Device).
Sets whether or not to power off connected de-
vices when the projector is turned off.
Displays a list of available WirelessHD devices
that can be connected.
Enables or disables the WirelessHD function.
Displays the reception for the image being pro-
jected.
0% is displayed when no image signal is being
input. Use the Link indicator to check the com-
munication status of the WirelessHD Transmit-
ter. p.68
s
Sets the connection mode of WirelessHD devi-
ces.
Resets WirelessHD settings to their default set-
tings.
Note that even if you reset the projector, the
WirelessHD Transmitter settings are not reset. To
reset the WirelessHD Transmitter, press the Set-
up button on the base.
s
p.34
s
*1
.
p.68