Toshiba CAMILEO BW10 Quick Start Manual page 4

CAMILEO BW10
k Storing and maintaining your camcorder
i Do not leave the camcorder unwashed after it has been immersed in salt
water or if salt water is adhering to it. Doing so may cause corrosion and
discoloration of the plating, as well as deterioration of the camcorder's
waterproof capability.
i After the camcorder has been used in water, use fresh water to wash it.
Never use soap or detergent to clean the camcorder, as doing so will
cause deterioration of the camcorder's waterproof capability.
i After washing the camcorder, take care to completely drain it, and use a
dry cloth to wipe off any drops of water adhering to it (page 15).
i Do not leave the camcorder in an environment colder than 0 °C (32°F) or
warmer than 40 °C (104°F), as doing so may cause deterioration of the
camcorder's waterproof capability.
i Waterproof seals are used in this camcorder. It is recommended that the
waterproof seals be replaced every year with new ones. For replacing the
seals, please consult your dealer.
* Please note that there is a fee for replacing the waterproof seal.
k Other cautions
i Do not subject the camcorder to severe jolts, as doing so may deform the
slot cover, terminal cover or the camcorder body, thus compromising its
waterproof capability. If the camcorder has been subjected to a strong jolt,
please consult with your dealer.
HINT
What is "JIS IPX8" (formerly "JIS protection grade 8")?
i "JIS IPX8" specifies that a device is protected against the effects of
continuous immersion in water.
EN
Downloaded From VideoCamera-Manual.com Manuals
NOTE
3 Quick Start Guide