Hitachi W50 Owner's Manual page 12

2. Using WPS (Wi-Fi Protected Setup)
Wi-Fi protected setup (WPS) is a network security standard that allows
you to easily connect your Wi-Fi speaker to your network.
Note : Do not connect an Ethernet Cable. Connecting an Ethernet Cable will
disable the Wi-Fi function.
: This setup process is for Wi-Fi routers that have the WPS feature.
Ensure that your router has this capability before using this setup
option.
1. Turn the speaker on and wait for it to completely boot up. It will take
approximately 60 seconds, and during this time the Wi-Fi LED will
blink RED and WHITE. When boot up is complete the Wi-Fi LED will
blink WHITE.
Note : If the speaker has been previously setup with another network or if
you wish to re-setup the speaker, press and hold the "WPS" button on
the speaker for 2 seconds, enabling Wi-Fi setup mode (AP Mode).
1 1
2. Press and hold the "WPS" button on the speaker for 2 seconds.
Note : The Wi-Fi LED will quickly blink RED.
3. Press and hold the WPS button on the wireless router for 2 seconds.
Note : When the connection is established, the Wi-Fi LED on the speaker
will turn a solid WHITE color.
12
2
3