ABB COM600 series User Manual page 15

1MRS757276 COM600 series, Version 4.1
SNMP OPC Server User's Manual
Figure 3.2-1 Example view of SAB600
The configuration work can basically be divided into two separate tasks:
1. building an object tree, and
2. configuring object properties.
First, you need to build an object tree. This is done by adding objects to the object tree,
see 3.3.1, General about building object tree.
Figure 3.2-1 shows an example of how the object tree may look like after it has been
built. In the example tree you can see the SNMP OPC Server object and its child objects
like subnetworks, devices, and data objects. Indentation is used to indicate the parent-
child relationship between the objects.
After you have added the necessary objects to the object tree in the communication
structure, you need to configure them, see 3.4.1, General about configuring objects.
Table 3.2-1 SNMP OPC Server related objects
Object
SNMP OPC Server
SNMP OPC Subnetwork
Description
An object representing the SNMP OPC Server.
An object representing the network which the SNMP
device resides.
example_view.png
15