ABB COM600 series User Manual page 33

1MRS757276 COM600 series, Version 4.1
SNMP OPC Server User's Manual
Property/Para- Value or Value range/ Default
meter /Example
Unit meter, kilogram, second,
ampere, kelvin, mole, candela,
degrees, radian, steradian,
gray (J/Kg), becquerel (l/s),
degrees (Celsius), sievert
(J/Kg), farad, coulomb,
siemens, henry, volt, ohm, joule
(Nm), newton (kg m/s^2), hertz,
lux (lm/m^2)lx, lumen (cd sr),
weber (V s), tesla (Wb / m^2),
watt (J/s), pascal (N/m^2),
square meter (m^2), cubic
meter (m^3), meters per
second (m/s), meters per
second^2 (m/s^2), cubic meters
per second (m^3/s), mass per
cubic meter (kg/m^3), kilogram
meter (kg m), kilogram per
cubic meter (kg/m^3), meter
square / second (m^2/s), watt
per meter kelvin (W / m K),
joule per kelvin (J / K), parts
per million, rotations per
second (1 / s), radian per
second (rad / s), volt ampere
(VA), watts (I^2R), volt ampere
reactive (VISin), degrees,
(dimensionless) Cos, volt
seconds (Ws / A), volt square
(W^2 / A^2), amp second (As),
amp square (A^2), amp square
second (A^2s), volt ampere
hours, watt hours, volt ampere
reactive hours, volts per hertz
Default: Dimensionless
Limit Value Super-
vision
High 0
High-High 0
Low 0
Low-Low 0
Max 20000
Min 0
Description
SI unit for measurement as described in
IEC61850.
High limit for measurement. Event is cre-
ated, when value crosses the limit.
High-high limit for measurent. Event is
created, when value crosses the limit.
Low limit for measurement. Event is cre-
ated, when value crosses the limit.
Low-low limit for measurement. Event is
created, when value crosses the limit.
Maximum value for measurement.
Minimum value for measurement.
33