Siemens optiPoint 410 Administrator's Manual page 76

Alphabetical Reference
LDAP or XML
•
LDAP server Port
•
•
•
•
Æ page 28
LDAP Template Filename
•
•
•
•
•
Æ page 34
LED Test
•
•
Æ page 40
Line Status
•
•
•
•
Æ page 43
1.
76
Further description ... (DSM)
Can be configured only for the optiPoint 410 standard/advance.
If an Æ LDAP server is being used, enter the Æ Port number here for
communication with this server.
Valid values: 1 ... 65535.
Number editor in optiPoint 410 Æ page 92.
Æ page 56
Can be configured only for the optiPoint 410 standard/advance.
If an Æ LDAP server is used, enter the name of the LDAP template file
that is used in connection with this server.
The file must exist in a defined directory on the Æ FTP server
(Æ Download Server Address, Æ FTP Path).
Standard name Æ page 95.
Text editor in optiPoint 410 Æ page 93.
Æ page 58
Conduct this test to check the function of the Æ LED in the
optiPoint 410 zu prüfen.
All the LEDs blink during the test.
Activate the display to view the functions and values used to run the
Æ LAN connections in the optiPoint 410.
Bit rate, activity, half / full duplex, as well as the status of the used net-
work or the manual setting in the optiPoint 410.
The display takes place through the four Æ LEDs of the left row (for
1
LAN Port ) as well through the top four LEDs of the right row (for PC
1
Port ):
Function LEDs on optiPoint 410
Speed
Activity
Duplex
Status
The status monitor remains active even during the normal operation of
the optiPoint 410. However, it does not affect the operation of the func-
tion keys.
See Æ page 10.
10 Mbit/s 100 Mbit/s
- not activ
Half-Duplex Full-Duplex
OK not available
Description of functions
-
activ
-
Error