Output Mode And Output Operation - Panasonic dp-100 series Instruction Manual

4 MOUNTING

The sensor mounting bracket (MS-DP1-1) is available as an option.
When mounting the sensor onto the sensor mounting bracket, etc., the
tightening torque should be 0.5N·m or less.
1
No. Part
1
M3 (length 6mm) screws
with washers
2
Sensor mounting bracket
(MS-DP1-1)

The panel mounting bracket MS-DP1-2 (optional) and MS-DP1-4
(optional), as well as the front cover MS-DP1-3 (optional) and DPX-04
(optional) are also available.

The type of the front cover differs depending on the mounting bracket.
Use MS-DP1-3 for MS-DP1-2, and DPX-04 for MS-DP1-4.

To mount the panel mounting bracket, refer to the Instruction Manual
enclosed with MS-DP1-2 or MS-DP1-4.
5 WIRING
Connection method
Attach the female connector of cable

CN-14A- to the 4-pin male connector.
Disconnection method
While pressing the release lever, pull out
the connector.
Pin assignment, 4-pin male connector
Pin no.
1
2
3
4
6 I/O CIRCUIT DIAGRAMS
Notes:

When using the analog voltage output, pay careful attention to the
connected device's input impedance.

If the cable is extended, the cable resistance will cause the voltage to
drop.
SEN TRONIC
AG
Produkte, Support und Service
2
Description
Accessory with MS-DP1-1
Optional
Cable with female
connector
CN-14A-C
Release lever
<Recommended product>
Contact: SPHD-001T-P0.5
Housing: PAP-04V-S
[JST Mfg. Co., Ltd.]
Terminal name
+V
Comparative output 1
• Standard type: Comparative
output 2
• Multifunction type: Analog
voltage output or external input
0V
Rugghölzli 2
CH - 5453 Busslingen
NPN output type

Standard type
Color code of cable with connector
(Brown) +V
(Black)
Comparative output 1
(White) Comparative output 2
(Blue) 0V
Internal circuit User's circuit

Multifunction type
Color code of cable with connector
(Brown) +V
5V
(White)
Analog voltage output
or external input
1k
(Black) Comparative output 1
(Blue) 0V
Internal circuit Users' circuit
PNP output type

Standard type
Color code of cable with connector
(Brown) +V
(Black) Comparative output 1
(White) Comparative output 2
(Blue) 0V
Internal circuit User's circuit

Multifunction type
Color code of cable with connector
(Brown) +V
(Black) Comparative output 1
1k
(White)
Analog voltage output
or external input
(Blue) 0V
Internal circuit User's circuit
7

OUTPUT MODE AND OUTPUT OPERATION

The EASY mode, hysteresis mode or window comparator mode can be
selected as the output mode for comparative output 1 and, for the standard
type DP-100, comparative output 2.
For details, see page 5, section 10, MENU SETTING MODE.
Easy mode
The comparative output is turned ON or OFF (depending on the N.O./N.C.
setting) when the threshold is reached. The tolerance of the threshold is
specified by the hysteresis setting. For details, see page 6, section 11, PRO
MODE.
P
0
Comparative
ON
output
OFF
Notes: • Hysteresis can be fixed in 8 levels.
For details, see page 6, section 11, PRO MODE.
• P-1 is displayed for comparative output 1 and P-2 for
comparative output 2 on the sub-display.
2
Tel. +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
Load
Load
+
12 to 24V DC
100mA max.
_
±10%
100mA max.
Load
+
12 to 24V DC
_
±10%
100mA max.
100mA max.
+
12 to 24V DC
100mA max.
_
±10%
Load
Load
100mA max.
+
12 to 24V DC
_
±10%
Load
H (Hysteresis)
mailbox@sentronic.com
www.sentronic.com