Selecting Modes; Setting Mode; Run Mode - Panasonic dp-100 series Instruction Manual

Hysteresis mode
The comparative output is turned ON or OFF (depending on the N.O./N.C.
setting) when the upper or lower threshold is reached and remains ON or
OFF until the other threshold is reached.
Hi
Lo
0
Comparative ON
output
OFF
Notes: • H (Hysteresis): 1 digit or more, 2 digits or more when psi is
selected as the pressure unit.
• Hi-1 or Lo-1 is displayed for comparative output 1 and Hi-2 or Lo-
2 for comparative output 2 on the sub-display.
Window comparator mode
The comparative output is turned ON or OFF (depending on the N.O./N.C.
setting) when the pressure lies between the upper or lower threshold. The
tolerance of the threshold is specified by the hysteresis setting. For details,
see page 6, section 11, PRO MODE.
Hi
Lo
0
Comparative
ON
output
OFF
Notes: • Hysteresis can be fixed in 8 levels.
For details, see page 6, section 11, PRO MODE.
• Hi-1 or Lo-1 is displayed for comparative output 1 and Hi-2 or Lo-
2 for comparative output 2 on the sub-display.
8

SELECTING MODES

DP-100 has 3 different modes:

RUN mode. For details, see page 3, section 9, RUN MODE.

Menu setting mode. For details, see page 5, section 10, MENU

SETTING MODE.


Pro mode. For details, see page 6, section 11, PRO MODE.
Switching modes
Press MODE to switch between modes.
From RUN mode, press MODE for 2s to select the menu setting mode.
From RUN mode, press for 4s to select pro mode.
MODE
To return to RUN mode, press
MODE
9

RUN MODE

In RUN mode, you can lock the keys and adjust the threshold for the param-
eters set in menu setting mode while the sensor is operating. For details,
see page 5, section 10, MENU SETTING MODE.
Threshold settings are displayed in the sub-display.
If you attempt to set threshold values that exceed the pressure range
allowed, DP-100 will alert you. UP (exceeds the upper limit) or DOWN (exceeds
the lower limit) will appear on the sub-display. DOWN will also appear if the Hi
threshold value exceeds the Lo threshold value for the hysteresis mode or
window comparator mode.
Standard type
Setting condition 1
Comparative output 1 set to:
Comparative output 2 set to:
SEN TRONIC
AG
Produkte, Support und Service
H (Hysteresis)
H (Hysteresis)
H (Hysteresis)
for 2s.
EASY (EASY mode)
OFF (OFF)
Rugghölzli 2
CH - 5453 Busslingen
Setting condition 2
Comparative output 1 set to:
Comparative output 2 set to:
Automatic
MODE
Automatic
Setting condition 3
Comparative output 1 set to:
Comparative output 2 set to:
Automatic
MODE
MODE Automatic
MODE
Automatic
Setting condition 4
Comparative output 1 set to:
Comparative output 2 set to:
Automatic
MODE
Automatic
Setting condition 5
Comparative output 1 set to:
Comparative output 2 set to:
Automatic
MODE
Automatic
MODE
MODE
Automatic
Setting condition 6
Comparative output 1 set to:
Comparative output 2 set to:
Automatic
MODE
Automatic
MODE MODE
Automatic
MODE
Automatic
3
Tel. +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
EASY (EASY mode)
EASY (EASY mode)
EASY (EASY mode)
HYS (Hysteresis mode), or
WCMP (Window comparator mode)
HYS (Hysteresis mode), or
WCMP (Window comparator mode)
OFF (OFF)
HYS (Hysteresis mode), or
WCMP (Window comparator mode)
EASY (EASY mode)
HYS (Hysteresis mode), or
WCMP (Window comparator mode)
HYS (Hysteresis mode), or
WCMP (Window comparator mode)
mailbox@sentronic.com
www.sentronic.com