1.1.9
Internal connectors
1.
Intel
Serial ATA 6 Gb/s connectors (7-pin SATA6G_12; SATA 6G_34;
®
SATA 6G_56)
These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s
signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10
configuration with the Intel
Z270 chipset.
•
•
1-14
Rapid Storage Technology through the onboard Intel
®
These connectors are set to [AHCI Mode] by default. If you intend to create a Serial
ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [Intel
RST Premium With Intel Optane System Acceleration (RAID)].
Before creating a RAID set, refer to the manual bundled in the motherboard support
DVD.
Chapter 1: Product Introduction
®