Asus TUF Z270 Mark 1 User Manual page 34

6. CPU, water pump, high amp, CPU optional, assistant fan, extension, and chassis
fan connectors (4-pin CPU_FAN; 4-pin W_PUMP+; 4-pin CPU_OPT; 5-pin EXT_
FAN; 4-pin H_AMP_FAN; 4-pin CHA_FAN1-5; 4-pin ASST_FAN)
Connect the fan cables to the fan connectors on the motherboard.
•
•
•
•
•
•
•
1-18
DO NOT forget to connect the fan cables to the fan connectors. Insufficient air
flow inside the system may damage the motherboard components. These are not
jumpers! Do not place jumper caps on the fan connectors!
Ensure that the CPU FAN cable is securely installed to the CPU fan connector.
The CPU_FAN connector supports the CPU fan of maximum 1A (12 W) fan power.
The CPU_FAN, CHA_FAN and ASST_FAN connectors support the TUF Thermal
Radar 2+ feature.
For better Q-Fan functions, we recommend using 4-pin PWM fans when you connect
powerful fans (1A or above) onto the H_AMP_FAN connector.
Ensure to disable Q-Fan functions if you want to connect powerful 3-pin DC fans (1A
or above) onto the H_AMP_FAN connector.
W_PUMP+ function support depends on water cooling device.
Chapter 1: Product Introduction