Power Management Screen Options - Dell Vostro 3667 Owner's Manual

Power management screen options

Option Description
AC Recovery Specifies how the computer will respond when AC power is applied after an AC power loss. You can set the AC
Recovery to:
•
•
•
Auto On Time Allows you to set the time at which the computer must turn on automatically. The options are:
•
•
•
•
Default setting: Disabled
Deep Sleep Control Allows you to define the controls when Deep Sleep is enabled.
•
•
•
USB Wake Support Allows you to enable USB devices to wake the system from Standby.
•
Default setting: The option is disabled.
Wake on LAN/ Allows you to enable or disable the feature that powers on the computer from the Off state when triggered by a
WLAN LAN signal.
•
•
•
•
•
Default setting: Disabled
Block Sleep This option lets you block entering to sleep (S3 state) in operating system environment.
Block Sleep (S3 state)
Default setting: This option is disabled
52 System Setup Options
Power Off (default)
Power On
Last Power State
Disabled
Every Day
Weekdays
Select Days
NOTE: This feature does not work if you turn off your computer using the switch on a power strip or
surge protector or if Auto Power is set to disabled.
Disabled
Enabled in S5 only
Enabled in S4 and S5 – This option is enabled by default.
NOTE: This feature is only functional when the AC power adapter is connected. If the AC power
adapter is removed during Standby, the system setup removes power from all the USB ports to
conserve battery power.
Enable USB Wake Support
Disabled
LAN Only
WLAN Only
LAN or WLAN
LAN with PXE Boot