Pioneer PRO-810HD Service Manual page 194

1
6
HDMI (INPUT1) (HDMI jack)
For connection of components that have a digital
video output terminal such as a digital set top box,
A
DVD player, etc. compatible with HDCP. Before
attempting to connect one of these devices, read its
operating instructions to make sure that it can be
connected.
(HDCP = High-bandwidth Digital Content Protection)
(HDMI = High Definition Multimedia Interface)
Select this INPUT or the ANALOG RGB IN (
[INPUT1 SELECT] in the menu.
7
AUDIO (INPUT2) (RCA Pin jacks)
Use to obtain sound when INPUT2 (analog audio) is
B selected.
Connect these jacks to the audio output connectors of
components connected to INPUT2.
Note
The left audio channel (L) jack is not compatible with
monaural input sources.
8
HDMI (INPUT2) (HDMI jack)
For connection of components that have a digital
video output terminal such as a digital set top box,
DVD player, etc. compatible with HDCP. Before
attempting to connect one of these devices, read its
C
operating instructions to make sure that it can be
connected.
(HDCP = High-bandwidth Digital Content Protection)
(HDMI = High Definition Multimedia Interface)
9
MAIN POWER switch
Use to switch the main power of the plasma display
on and off.
0
AC IN
A power cable is furnished with the plasma display;
connect one end of the po wer cable to this connector,
D
and the other end to a standard AC power source.
-
SPEAKER (L) terminal
For connection of an external left speaker. Connect a
speaker that has an impedance of 8 –16 .
=
S-VIDEO (INPUT3) (S-video jack)
For connection of components that have an S-video
output jack such as a video deck, video camera, laser
disc player, or DVD recorder.
~
VIDEO IN (INPUT4) (BNC jack)
For connection of components that have a composite
E
video output jack such as a video deck, video camera,
laser disc player, or DVD recorder.
!
VIDEO OUT (INPUT4) (BNC jack)
Use the VIDEO OUT (INPUT4) jack to output the video
signal to an external monitor or other component.
Note
The video signal will not be output from the VIDEO OUT
(INPUT4) jack when the main power of this display is off or in
standby mode.
F
194
1
2
@
AUDIO R/L (INPUT3/4) (RCA Pin jacks)
Use to obtain sound when INPUT3 or INPUT4 is
selected. Connect these jacks to the audio output
connectors of components connected to INPUT3 or
INPUT4.
#
ANALOG RGB (INPUT5) (BNC jacks)
For connecting components equipped with RGB
outputs jacks, such as a personal computer or external
RGB decoder; or components equipped with
4
component output jac ks, such as a DVD recorder.
) in
Make sure that the connection made corresponds to
the format of the signal output from the connected
component.
$
AUDIO R/L (INPUT5) (RCA Pin jacks)
Use to obtain sound when INPUT5 is selected. Connect
these jacks to the audio output connectors of components
connected to INPUT5.
Ω
PRO-1010HD
2
3
3
4
4