Panasonic KX-TD816 User Manual page 49

To call an external party
From an External Party
In Non Security Mode
DISA
phone no.
Enter DISA
phone number.
In Trunk Security Mode
DISA
phone no.
Enter DISA
phone number.
In All Security Mode
DISA
phone no.
Enter DISA
phone number.
To re-try
From an External Party
To dial a different number during a conversation with an outside party or
while hearing the ringback, reorder, or busy tone
Dial .
• If a call between two external parties is established, both parties will hear an alert tone
fifteen seconds before the time limit (Default: 10 min.) runs out. To extend the call duration
time (Default: 3 min.), dial any key except " " while hearing an alert tone.
• If Built-in Automated Attendant service is set, you can access the desired extension
simply by pressing one digit number (0-9) according to the outgoing message.
• If the wrong DISA user code is entered three times, the call will be disconnected.
• You can change your DISA user code at any time. Refer to 4.2.9 DISA User Codes (017).
Operation
line access
no.
R.B.Tone and
DISA outgoing
message
Enter line
access number
(9/0 or 81-88).
line access
no.
R.B.Tone and
DISA outgoing
message
Enter line
number
access
(9/0 or 81-88).
DISA user
code
R.B.Tone and
DISA outgoing
message
Enter pre-assigned
DISA user code
(4-10 digits).
desired no.
D.Tone
Enter desired number.
Enter a line access number (9/0 or 81 to 88) as
the first digit when calling an external party.
phone no.
D.Tone from
Central Office
Enter phone
number of the
external party.
DISA user
code
One short
beep
Enter pre-assigned
DISA user code
(4-10 digits).
line access
no.
One short
beep
Enter line
number
access
(9/0 or 81-88).
2.2 Making Calls
phone no.
D.Tone from
Central Office
Enter phone
number of the
external party.
phone no.
D.Tone from
Central Office
Enter phone
number of the
external party.
49