Other Features; Energy Saver/Interrupt - Panasonic DP-2500 Operating Instructions Manual

Other Features

Energy Saver/Interrupt

SORT
LCD
CONTRAST
NOTE
32
ENERGY SAVER Key INTERRUPT Key
DP-3000
MULTI-SIZE
COPY
FEED
ADD TONER
FAX
ON LINE
INTERNET
PRINTER
ON LINE
DATA
ENERGY SAVER
INTERRUPT
C Energy saver time (15 minutes) and Auto off time (60 minutes) can be changed by the
key operator. (See page 39)
Modes
Normal Operation Approximately150 Wh
Energy Saver Mode Approximately 45 Wh
Auto Off Mode Approximately 2.9 Wh
∗
Sleep Mode will not activate if the file for the Overlay mode has been stored in
memory. (See page 30)
ENERGY SAVER INTERRUPT FUNCTION RESET
CLEAR
ORIGINAL COPY
REDIAL /
SIZE SIZE
PAUSE
ABC DEF
A3
1 2 3
FLASH/
SUB-ADDR
FLS
GHI JKL MNO
B4 4 5 6
LINE
SELECT
A4
PQRS TUV WXYZ
7 8 9
MONITOR
A4
START START
0
SET
A5
MON. VOL.
ALARM ACTIVE
This mode can save power while the copier is not in
use.
Energy Saver Mode
# To enter this mode
Press the ENERGY SAVER key, the indicator will
flash.
$ To cancel this mode and make copies
Press the ENERGY SAVER key again.
Auto Off Mode
# Automatically enters after 60 minutes from the last
copy. The Copier power will drop and the indicator
will light.
$ To make copies, press the ENERGY SAVER key.
Interrupt Mode
C This mode can interrupt other copy jobs while
making copies.
# Touch the INTERRUPT key, the indicator will light.
$ Make another copy job.
% Touch the INTERRUPT key again to continue the
original job.
Note: The ADF/iADF can not be used with interrupt.
(Use only the Platen)
Power Consumption
STOP
*
Warm Up Time
N/A
30 sec. recovery
35 sec. recovery (DP-2500)
45 sec. recovery (DP-3000)