Philips KEY008/17B Quick Start Manual

quick start guide

Thank you for buying this Philips wearable digital camera.To get
started, follow the steps as shown.
1
Charging
Charge up your camera (3 hours) before
using it. Detach the USB cover and
connect the camera to your computer's
USB port. (Windows 98 users, please install required drivers
first*).Your computer should be switched on. While charging the
POWER (green) indicator blinks.
Switch on & Snap
2
Now your camera is ready for action -
simply turn the lens cap clockwise to
power ON. Hold the camera upright and
frame your subject through the viewfinder.
Press the shutter button.
Transfer
3
Turn your camera OFF and connect it to your computer's USB
port. Open Windows Explorer* and drag and drop your
pictures from your camera to your desired destination folder.
Alternatively, use Photo Manager to transfer, enhance, edit and
organize your pictures.To install Photo Manager insert the
by-packed CD into your computer's CD-ROM drive.The
installation menu is automatically launched for first time users.
Find more information on the by-packed CD-ROM or visit
www.philips.com/support
*CAUTION! For Windows 98 users only:
WHEN CONNECTING THE CAMERA FOR THE VERY FIRST TIME TO
CHARGE UP/ TRANSFER FILES, MAKE SURE YOU ONLY DO SO AFTER YOU
HAVE INSERTED THE SUPPLIED CD-ROM INTO THE CD-ROM DRIVE FOR
INSTALLATION OF THE REQUIRED DRIVERS.