Pioneer DDJ-SX2 Service Manual page 28

1
Figure-5 State transition between Service mode and Velocity check mode
A
Press the Rotary selector.
Press left HOT CUE Mode button.
Press left ROLL Mode button.
B
Velocity check mode 2
Left Pad 5, Pad 6, Pad 7,
and Pad 8 are checkable.
Press left SAMPLER
Mode button.
Press left ROLL
Mode button.
C
[Trigger of which check velocity]
1) Press left Pad 1, Pad 2, Pad 3, or Pad 4 when LED within left HOT CUE Mode button is lit with blue color.
2) Press left Pad 5, Pad 6, Pad 7, or Pad 8 when LED within left ROLL Mode button is lit with blue color.
3) Press right Pad 1, Pad 2, Pad 3, or Pad 4 when LED within left SLICER Mode button is lit with blue color.
4) Press right Pad 5, Pad 6, Pad 7, or Pad 8 when LED within left SAMPLER Mode button is lit with blue color.
[Posterior condition]
1) Lighting of Channel Level Indicator (CH3) is changed depending on pressure force of the pressing Pad (*2).
2) Lighting of Channel Level Indicator (CH1) is changed depending on pressure force of the pressing Pad (*3).
3) Lighting of Channel Level Indicator (CH2) is changed depending on pressure force of the pressing Pad (*4).
4) Lighting of Channel Level Indicator (CH4) is changed depending on pressure force of the pressing Pad (*5).
D
*2: When LED within left HOT CUE Mode button is lit with blue color, Channel Level Indicator (CH3) is used in order to check velocity of left Pad 1.
When LED within left ROLL Mode button is lit with blue color, Channel Level Indicator (CH3) is used in order to check velocity of left Pad 5.
When LED within left SLICER Mode button is lit with blue color, Channel Level Indicator (CH3) is used in order to check velocity of right Pad 1.
When LED within left SAMPLER Mode button is lit with blue color, Channel Level Indicator (CH3) is used in order to check velocity of right Pad 5.
*3: When LED within left HOT CUE Mode button is lit with blue color, Channel Level Indicator (CH1) is used in order to check velocity of left Pad 2.
When LED within left ROLL Mode button is lit with blue color, Channel Level Indicator (CH1) is used in order to check velocity of left Pad 6.
When LED within left SLICER Mode button is lit with blue color, Channel Level Indicator (CH1) is used in order to check velocity of right Pad 2.
When LED within left SAMPLER Mode button is lit with blue color, Channel Level Indicator (CH1) is used in order to check velocity of right Pad 6.
*4: When LED within left HOT CUE Mode button is lit with blue color, Channel Level Indicator (CH2) is used in order to check velocity of left Pad 3.
When LED within left ROLL Mode button is lit with blue color, Channel Level Indicator (CH2) is used in order to check velocity of left Pad 7.
When LED within left SLICER Mode button is lit with blue color, Channel Level Indicator (CH2) is used in order to check velocity of right Pad 3.
When LED within left SAMPLER Mode button is lit with blue color, Channel Level Indicator (CH2) is used in order to check velocity of right Pad 7.
*5: When LED within left HOT CUE Mode button is lit with blue color, Channel Level Indicator (CH4) is used in order to check velocity of left Pad 4.
E
When LED within left ROLL Mode button is lit with blue color, Channel Level Indicator (CH4) is used in order to check velocity of left Pad 8.
When LED within left SLICER Mode button is lit with blue color, Channel Level Indicator (CH4) is used in order to check velocity of right Pad 4.
When LED within left SAMPLER Mode button is lit with blue color, Channel Level Indicator (CH4) is used in order to check velocity of right Pad 8.
*: This controller's velocity has resolution of 128 steps. But, Channel Level Indicator is only 11 steps.
So, the controller should round the actual velocity value to 11 steps
so that indicate behavior of velocity using Channel Level Indicator during Velocity check mode.
*: Lighting of Channel Level Indicator should be applied pressure force of not only initial touch (velocity) but also after touch during
Velocity check mode.
F
28
1
2
Service mode
Press the Rotary selector.
Velocity check mode 1
Left Pad 1, Pad 2, Pad 3,
and Pad 4 are checkable.
Press left HOT CUE
Mode button.
Press left ROLL
Velocity check mode 3
Mode button.
Right Pad 1, Pad 2, Pad 3,
and Pad 4 are checkable.
Press left SLICER
Mode button.
Press the Rotary selector.
Service mode
DDJ-SX2
2
3
Press both left and
right HOT CUE Mode buttons.
Press left HOT CUE Mode button.
Press left SAMPLER Mode button.
Press left SLICER
Mode button.
Press left SAMPLER
Mode button.
Press left SLICER
Mode button.
3
4
Press the Rotary selector.
Velocity check mode 4
Right Pad 5, Pad 6, Pad 7,
and Pad 8 are checkable.
4